With cordless hair clippers, you don’t have to worry about tangled cords and switching sockets. However, it is important to ensure that your cordless clipper is well-maintained for optimal performance.
In this article, we’ll give you the complete guide to maintain your cordless hair clipper. Keep reading to find all the tips on maintaining and caring for your cordless hair clipper! Don’t let poor maintenance ruin your favorite grooming accessory – get ready for perfect haircuts everytime!
Introduction
Taking proper care of your hair clipper is important to maintain its optimal performance, as well as to ensure safe and comfortable use. This guide will help you understand how to correctly look after your hair clipper and keep it in good working condition.
It is recommended that you take the time to read the instructions carefully before using your cordless hair clipper and follow these instructions closely when cleaning, oiling and storing your cordless hair clipper. Additionally, regularly checking for damages or defects can help you spot any issues quickly and prevent any future problems from arising.
Taking care of your cordless hair clipper properly is essential for lasting performance and convenience.
Importance of Maintaining Your Cordless Hair Clipper
In order to get the best possible performance out of your cordless hair clipper, it is important to take good care of it. By taking proper steps when using, storing and cleaning your clipper, you can ensure that it continues to produce quality haircuts for years to come. Here are some tips for making sure your cordless hair clipper stays in optimal condition.
- i) Cleaning: While you’re giving yourself or someone else a haircut, make sure to clean the blades after each use with a brush and some rubbing alcohol if necessary. This should help prevent any build-up of hair products or bacteria which can damage the blades over time.
- ii) Storage: Make sure your cordless clipper gets stored in a clean and dry space when not in use. This will prevent rust or other corrosion from occurring on the blades or other parts of the clipper which can impact performance over time.
iii) Charging: It’s important to charge your cordless hair clipper regularly in order to extend its lifespan. Depending on how often you use it, it should be charged at least once every three weeks otherwise its battery life may decline over time.
Benefits of Proper Maintenance
Proper maintenance of cordless hair clippers is essential to keep them in a good working condition. It not only helps to extend the life of the clipper but also ensures that they remain hygienic and clean at all times. Proper maintenance of your clipper also allows it to perform at its best, resulting in longer-lasting batteries and a cleaner cut.
Following are some of the benefits of proper maintenance:
– Helps prolong the lifespan of your cordless hair clipper. With regular cleaning and lubrication, your machine will last longer than it would otherwise without proper maintenance. This saves you money over time since you won’t have to buy a new clipper as often as you would if you didn’t take care of it.
– Allows for a better cut every time you use your clipper. When blades are dull due to lack of maintenance, they will pull and snag more on the hair, creating an uneven haircut that doesn’t look great or last very long. By properly cleaning and sharpening them on a regular basis, the blades will remain sharp for a much longer period and ensure an even cut every time you use your cordless hair clipper.
– Keeps your machine clean and hygienic at all times which is extremely important when it comes to personal grooming products like haircare tools and machinery. Proper cleaning helps maintain good hygiene standards which are essential for anyone who wants their personal grooming rituals done safely without any risk of infection or other health dangers associated with unclean equipment.
Basic Maintenance Steps
Basic maintenance steps should be done regularly to ensure optimal performance from your cordless hair clippers.
- Clean the blades: Blades should be cleaned with a soft brush at least once per month. If you are using a blade with plastic teeth (like most consumer clippers have), then you must pay extra attention when cleaning the blades. Using a lubricant or blade wash can help reduce friction and extend blade life, as well as create less noise when cutting hair. Washing the blades in warm water with liquid dish soap also works, but make sure all soap is washed away and air-dry before reassembling the clipper.
- Oil your blades: Oiling your blades regularly is an essential part of keeping them in good condition. The type of oil and how often to oil will depend on your particular clipper model, so refer to the manual for instructions on what type of oil and how much to use. Oiling your blades moderately (what some refer to as “flood”) around every seven days should be sufficient depending on usage frequency. Too much oil will accumulate dirt which can lead to an uneven cut or worse, cause excessive wear and tear on motor bearings that could lead to motor failure if not addressed immediately.
- Sharpen Your Blades: Sharpening or honing (“stropping”) your electric hairclips’ blades will help keep them sharp and precise for precise cutting potential over time . Make sure the manufacturer manual indicates this is something that needs to be done on a regular basis before attempting any sharpening techniques inside a professional shop, Depending on how frequently you use the clipper, it may need sharpening at least every six months or more often in certain conditions like high frequency cuts daily or in professional barbering shops.
Cleaning the Blade and Body
Cleaning your clipper and blades regularly is essential for optimal performance. Before you start, make sure to have a cleaning brush, small bowl for water, and cleaning oil on hand.
First, detangle any knots in the clipper’s cord to avoid damaging the trimmer. Attach the cleaning brush to the clipper and sweep away any hair or debris from the blade. Be careful not to touch the blade with your skin or risk sustaining an injury from contact with an exposed blade edge. Once you’ve removed all of the visible material, run the clipper under lukewarm water using a cloth or non-metallic brush to clean off remaining particles that can’t be seen with the naked eye. Pat dry with a soft cloth before applying two drops of oil onto each cutter edge with a few more drops going onto rotating parts of the trimmer head such as screws or dials moving at high speed. This point should not be skipped as it prevents rusting of your blades and dissolves chemical build up in between cutting teeth areas improving its overall performance such as combing capabilities and precision cutting behaviors when in use.
Oiling the Blade and Moving Parts
For optimal performance, it is important to regularly oil the blade and other moving parts of the cordless hair clipper. To oil the blade and moving parts, apply one or two drops of clipper oil to a cotton swab or cloth. Gently wipe the oil directly onto the blade teeth and any other movable parts that appear dry.
Additionally, it might be necessary to hold regular pieces of paper in between each of the blades as you compress them together repeatedly for a few seconds – this will help spread the oil evenly onto both blades at the same time.
When finished, be sure to unplug your cordless hair clipper from its power source and gently wipe off any excess residue with a clean cloth before storing away safely. Clipper oil is specially designed to lubricate metal surfaces on electric clippers while also inhibiting rust build-up; frequently applying it can increase its lifespan as well protect your tool kit from damage due to wear and tear.
Checking and Replacing the Battery
The battery is the single most important part of a cordless hair clipper, as it keeps the razor sharp blades moving. It is important to monitor and check your battery frequently to make sure it is working correctly. Most cordless hair clippers come with batteries that last anywhere from 45 minutes to an hour, depending on the model. If the clipper is not lasting as long as advertised, it may be time to replace the battery.
When replacing your battery, make sure you buy one that is specifically designed for use with your specific clipper model. This will ensure optimal performance and also help protect your other components from damage due to inconsistent power supply. Before purchasing a replacement battery, be sure to read all instructions and safety warnings included with the product so you know how to properly handle and dispose of it when needed. Additionally, always remove dead batteries from your device in order to avoid possible damage or fire danger caused by heat buildup over time.
Storing Your Hair Clipper Properly
Proper storage of your cordless hair clipper is important for optimal performance and longevity. Ideally, the clipper should be stored in a cool, dry place away from direct sunlight and other sources of heat.
Be sure to wipe down the blades with a damp cloth before storing the clipper. This will remove excess hairs and protect against rusting. Additionally, store your clipper in an upright position using the stand or case supplied when possible to prevent accidental damage.
After each use, empty any residuals of water or cleaning products as these can cause damage to internal components of your device if left unchecked.
Finally, if you’re not using your device often it is recommended that you charge it up every few weeks to help maintain its battery life.
Advanced Maintenance Techniques
Although regular cleaning and oiling can keep your cordless hair clipper running smoothly, there are also a few advanced techniques you can try to ensure optimal performance.
Blade Sharpening: A blade that’s been used for too long can become dull or misshapen and will produce poor results. To avoid this, invest in a good quality blade sharpener and regularly use it on all blades. It’s important to follow the manufacturer’s directions when using a blade sharpener as improper use can cause damage to the blade.
Blade Replacement: In addition to sharpening, you should also regularly replace the blades on your hair clipper. Generally speaking, it is recommended that blades be replaced at least once per year – or sooner if you notice any damage or ragged edges. Remember to always use compatible blades for optimal performance.
Grease Maintenance: To keep your cordless hair clipper running at its best, it’s important that you properly grease the metal parts of the tool with a quality lubricant designed for small motors such as those found in most cordless tools. Be sure to apply grease liberally to both sides of each component so that no part of the mechanism is left uncovered and make sure to wipe off any excess before reassembling the device.
Disassembling and Cleaning Internal Parts
In order to ensure optimal performance of your cordless hair clipper, it is important to clean and maintain the internal parts of the device.
First, disassemble the inner components of the clipper. Depending on your model, these will usually include a blade set, charging base/plug heads, lubricated oil/grease pads, comb guards and an optional cleaning brush.
Remove any visible hair buildup or blockage from within each part. Gently wipe away any visible dirt or debris with a soft cloth and mild detergent before cleaning with water. Use the cleaning brush (if provided) to help dislodge hairs trapped in tight spaces on the blade set or other parts of the clipper.
For additional step-by-step instructions on proper disassembly and cleaning procedures for your specific model, consult your user manual.
Sharpening or Replacing Dull Blades
Keeping your blades sharp and in good condition is key to getting a successful cut every time you use your cordless hair clipper. Depending on how much you use your clipper and the type of material being cut, the blades can become dull quickly and start giving poor results. To avoid this, you should regularly assess the condition of the blades by inspecting them for sharpness and other signs of wear.
If you find that the blades are dull, you have two options to restore their effectiveness – sharpening or replacing them. Sharpening is done by grinding or honing the cutting edges of the blades with a kit or specific sharpening tool for each blade type, depending on their design. This will make them thinner, sharper and more effective at cutting through hair comfortably.
On the other hand, if your clippers’ blades have become dull with no amount of sharpening making a difference, it’s time to replace them altogether with new ones from your model’s manufacturer. When using new blades make sure they are firmly secured in place and test them out on some soft material before using on someone’s hair just to be sure they cut properly without pulling at the hair too much.
Upgrading or Repairing Damaged Parts
If you notice any signs of damage or wear in your cordless hair clipper, it is important to replace or repair any parts as soon as possible. This will help to maintain optimal performance and reduce the risk they may stop working abruptly while trimming hair.
If there is an issue that cannot be fixed with a simple rinse after every use, you may need to purchase replacement parts to ensure everything is functioning optimally. For example, if you need to replace the blades, look for accessories that are specifically compatible with your model. Make sure that you always follow the instructions provided with each part carefully and exercise caution during repairs or upgrades.
Conclusion
By following the steps outlined above, you will be able to keep your cordless hair clipper in top condition. These simple maintenance and cleaning techniques can help you achieve optimal performance out of your trimmer so that it will last longer and offer a better cutting experience.
It is worth the effort to take care of your hair clipper properly, as it will save you time and money over its lifespan. By making sure to always read the manufacturer’s instructions and caring for your trimmer with regular maintenance, you can ensure that it always performs at its best.
Recap of Important Points
Recap of Important Points:
It is important to remember that in order to ensure optimal performance from your cordless hair clippers, you will need to perform regular maintenance on them. This includes ensuring that blades are sharp, shoes are aligned properly and that the device is cleaned regularly and stored in a cool dry place.
You should unplug your cordless clipper after use and allow the motor to cool down before storing or cleaning it. You should also oil the blades first before wiping them with a lightly dampened cloth. Finally, always check the condition of the charger plug or battery between uses, including polarity and ventilation holes, as this will help you maintain optimal performance from your cordless clipper.
- Step-by-Step Cleaning Process:
- Unplug your cordless hair clipper after use and allow the motor to cool down before cleaning it.
- Put a few drops of oil on the blades then wipe with a lightly dampened cloth – front and back – taking extra care around any raised parts or complicated jigsaws which are more likely to collect hair particles
- Reassemble all pieces in their correct position after cleaning
- Reconnect power to charge battery if necessary
- Place your cordless hair clipper into its saddle bag/case for storage in a cool dry place when finished
- Multiple Maintenance Options:
Aside from regular cleaning they also need occasional maintenance including:
1) Aligning teeth on removable blade sets evey 6 months or so
2) Replacing blade sets at least once per year (depending on usage)
3) Checking operation of charger plug or battery between uses – including polarity & ventilation holes
See Also :
- Best Cordless Framing Nailer 2023
- Best Cordless Tiller 2023
- Best Cordless Edger 2023
- Best Cordless Multi Tool 2023
- Best Cordless Glue Gun 2023
